For Boats/Ships
for your boat or yacht
Description
Epiphanes Epoxy Primer
Description:
Two-component anti-corrosion primer based on epoxy resin and zinc phosphate.
Excellent adhesion to various substrates, very good corrosion resistance,
high filling power and excellent sandability.
Packaging: 750ml.
Application:
Filling primer in a two-component system on (bond) wood, polyester or anti-rust primer
in a two-component system on steel and aluminum, inside and outside, below and above the waterline.
Paintable:
After 12 hours at 18°C. Within 5 days, without intermediate sanding.
Spreading power:
12m² per liter @ 50 µm dry film thickness
Colours: White
Gloss: Semi-gloss
Density: 1.62 kg / dm³ (mixed product)
Viscosity at 20°C. / 65% RH 100 seconds DIN cup 4 mm
Solids content 50 ± 2 vol..% (mixed product)
VOC content 417 grams / liter (mixed product)
Packaging 750ml..
Shelf life At least 2 years from date of manufacture, if stored at a
temperature between 5° and 30° in unopened original packaging.
Mixing ratio:
Induction time at 20°C. / 65% RH 15-20 minutes
Pot life after mixing:
12°C. 12 hours
20°C. 8 hours
28°C. 4 hours
Processing conditions during: application and drying
Temperature minimum 12°C. - maximum 28°C.
Relative humidity minimum 50% - maximum 75%
Temperature of the substrate must be at least 3 degrees above the dew point.
Thinner brush Epifanes Thinner D-601
Thinner syringe Epifanes Thinner D-601
General dilution Add thinner after mixing both components.
Amount partly dependent on the temperature of the product and the environment.
Application Brush - roller - spray.
Recommended film thickness per coat 80 - 200 µm wet = 40 - 100 µm dry
Application instructions Do not apply this product wet-on-wet and avoid higher layer thicknesses than
advised to prevent sagging and drying problems.
Temperature of paint, object and environment should not differ too much
deviate.
Epiphanes Epoxy Primer
Versatile two-pack epoxy primer
Theoretical yield 12m² per liter @ 40 µm dry film thickness
Practical efficiency The efficiency depends on the application method, conditions
during application, substrate quality and object shape, etc.
Application details
Drying times at 50 µm dry film thickness
If a subsequent coat of epoxy primer is applied within 5 days,
intermediate sanding is not necessary. After 5 days with granule P120
sand before applying a new coat.
Substrate conditions Completely free of rust, grease, dirt and other contaminants.
Remove salt and other water-soluble contaminants by rinsing thoroughly
with clean water and a pressure washer or an emulsifier.
Remove grease and oil by cleaning with water and ammonia or another suitable cleaning agent.
Paintability:
Above the waterline with
Above and below the waterline with
After 24 hours at 20°C / 65% RH
Epifanes Poly-urethane Yacht Varnish - Epifanes Poly-urethane Primer
Epifanes Epoxy HB Coat - Epifanes Interimcoat
Putty Epifanes Epoxy Filler 1500 - Epifanes Epoxy Finishing Filler
Epifanes Epoxy Filler LG 880
Safety The user of this product must comply with national health laws,
maintain safety and the environment. For more information and
the most current safety data, see safety data sheet.
